DJI Osmo Support

Connecting to your Osmo

Ensure that bluetooth is enabled on your iPhone, and that your iPhone is placed in your Osmo with the Osmo powered on.

In the Bluetooth Devices screen in the Pro Camera settings, tap Search for devices.

A list of available Osmo devices nearby will be displayed. Select the Osmo you would like to connect to.

The connection should be active now.


Working with Osmo and Pro Camera

There are two controls on the Osmo that can be used to take advantage of various functions in Pro Camera: the shutter button and the zoom slider.

Shutter button

Frame up your shots and tap the Osmo’s shutter button to begin a capture in any shooting mode. 

Zoom slider

The zoom slider is used to make manual adjustments to and to switch between shooting modes. 


Manual controls with the zoom slider


While in photo or video mode, tap or hold the zoom slider in either direction to adjust a manual control (Exposure, by default). These adjustments can be made before or during capture. 

You can change which manual control the zoom slider adjusts by tapping the Gimbal toolbar button, then Osmo settings (or by going to the Pro Camera's settings menu > Bluetooth Devices > Osmo settings). From this menu, select which of the manual controls you want the zoom slider to control.

While in Slow Shutter mode, tap the zoom slider in either direction to change the capture duration.

Changing iPhone lenses with the zoom slider

The zoom slider can also be used to change which iPhone lens is currently in use.

Double tap the zoom slider in either direction to cycle between the lenses on your device. A lens indicator will appear in the viewfinder reflecting the change between lenses. 


Troubleshooting

Mounting your phone

Mount your phone before powering on the Osmo. The Osmo will enter standby mode when no phone is detected.

Pairing your Osmo

Ensure that bluetooth is enabled on your iPhone and that it is placed in your Osmo with the Osmo powered on.

In the Bluetooth Devices screen in the Pro Camera settings tap Search for devices.

A list of available Osmo devices nearby will be displayed. Select the Osmo you would like to connect to.

The connection should be active now.

Resetting Osmo bluetooth

In the event that the Osmo is currently paired to a different device, you will need to reset its Bluetooth connection. 

Step 1:

Osmo Mobile 3: Press the M Button, Shutter Button, and Trigger simultaneously to reset the Bluetooth connection.

For Osmo Mobile 2: In the Bluetooth settings menu on the device that the Osmo is currently paired to, find the Osmo and choose to Forget This Device.

Step 2:  

In the Bluetooth Devices screen in the Pro Camera settings, tap Search for devices. A list of available Osmo devices nearby will be displayed. 

Step 3:

Select the Osmo you would like to connect to.

Disconnecting Osmo 

There are two ways to disconnect Osmo from Pro Camera. From the viewfinder, and in the Bluetooth Devices settings menu.

Disconnecting Osmo from the Viewfinder 

Tap the ‘Gimbal’ label in the left side of the toolbar to reveal its options. From here, choose to either disconnect the Osmo, or learn more about how to use Osmo with Pro Camera

Disconnecting Osmo from Bluetooth Devices settings menu

In the Bluetooth Devices screen in the Pro Camera settings, a list of connected Osmo devices will be displayed. Tap the icon with the three dots (...) next to the Osmo from which you would like to disconnect.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us