Your iPad is magnetically attached using our proprietary array of magnets.
How do I change the position of the iPad?
The stand uses friction hinges to hold the iPad in the position you set. To raise and lower we suggest placing one hand on the base and one hand on the attachment plate. To rotate we suggest using two hands holding the iPad and attachment plate at the same time.
Can the viewing position be locked?
The stand does not have a mechanical lock.
Does the stand have Magsafe charging?
Not at this time.
Is the base weighted?
Yes, the base is machined from solid aluminum so that it is stable in any position.
What devices can I use with my Infinity Adjust Stand?
LAB22 Stand
iPad Pro
iPad Air
Infinity Adjust Stand for iPad Pro 11” & 10.9” Air
11” - 1st, 2nd, 3rd Generation
10.9” - 4th, 5th Generation
Infinity Adjust Stand for iPad Pro 12.9”
12.9” Pro - 3rd, 4th, 5th, 6th Generation
n/a
Can I use the product outdoors?
The stand can be used outside, but isn’t designed for extended time outdoors.
What is the stand made of?
The base, support arm, and attachment plate are machined from aluminum. The attachment plate has a nylon microfiber pad.
Does the stand have stabilizing feet?
Yes, the stand has rubber feet for grip and protecting your desk.
What is the best way to clean my stand?
Best practice is to wash with a mild detergent and a microfiber cloth. Neutral, chlorine-free products with a pH of 6 to 8 are best. Avoid abrasive cloths as these may scratch the anodizing.
Magnetic Phone Stand with Dual Wireless Charging
What’s included in the box?
The Magnetic Phone Stand with Dual Wireless Charging
1.2m USB-C to USB-C charging cable
What power supply should I use with my stand?
We recommend any power supply with a minimum 20W output and a USB-C connection.
What connector is used to charge the stand?
The stand connects using a female USB-C
How long is the charging cable included in the box?
The length of the power supply cable is 1.2 m
What devices can I charge with the Magnetic Phone StandAny MagSafe-compatible phones and wireless charging-capable AirPods. It has been tested for compatibility with the following devices:
LAB22 Stand
iPhone
Airpods
Magnetic Phone Stand with Dual Wireless Charging
• iPhone 13 Pro Max
• iPhone 13 Pro
• iPhone 13
• iPhone 13 mini
• iPhone 12 Pro Max
• iPhone 12 Pro
• iPhone 12
• iPhone 12 mini
• AirPods Pro (Gen 1 & Gen 2)
• AirPods with Wireless Charging Case (2nd generation)
• Wireless Charging Case for AirPods
What orientations can I charge my iPhone ?
The stand will charge your phone in portrait and landscape orientations.
Is the charger MFi-certified?
Not at this time.
What is the stand made of?
The base, support arm, and charging pad are machined from aluminum. The charging pad is made from nylon microfiber.
Does the stand have stabilizing feet?
Yes, the stand has rubber feet for grip and protecting your desk.
Can I use the product outdoors?
The stand is designed for indoor use only.
What’s the best way to clean my stand?
Best practice is to wash with a mild detergent and a microfiber cloth. Neutral, chlorine-free products with a pH of 6 to 8 are best. Avoid abrasive cloths as these may scratch the anodizing.
Heavy Metal Headphone Stand
What tool do I need to assemble the stand?
A standard Phillips head screwdriver will work. The fixture has an M3x 0.5x15mm countersunk screw, so a small screwdriver is recommended.
Will it fit my headphones?
Measure your headphone from the underside of the band (generally the padded side that touches your head) to the bottom of the earcup. Your headphones will fit if this distance is 8.5” (216mm) or less.
Does the stand have charging?
Not at this time.
What is the stand made of?
The base, upright, and hanger are machined from aluminum. The hanger pad is made from nylon microfiber.
Does the stand have stabilizing feet?
Yes, the stand has rubber feet for grip and protecting your desk.
What’s the best way to clean my stand?
Best practice is to wash with a mild detergent and a microfiber cloth. Neutral, chlorine-free products with a pH of 6 to 8 are best. Avoid abrasive cloths as these may scratch the anodizing.
Did this answer your question?Thanks for the feedbackThere was a problem submitting your feedback. Please try again later.
